MadModder
The Shop => Tools => Topic started by: Joules on February 11, 2016, 08:02:01 AM
-
http://www.3ders.org/articles/20160211-aldi-australia-to-sell-budget-cocoon-create-3d-printer-and-3d-printing-pen.html
This might be a big opportunity for people to dip a toe into 3D printing, especially if the trial goes well and they then do a Europe release.
-
That is a rebadged Wanhao I3 rev 2. They are very good machines in fact and with minor mods they can be as reliable as you can get.
-
I was thinking with them being a one design and possibly shed loads sold there should be lots of people solving any of the niggly issues they may have and plenty of scope for after market spares.
-
The real benefit is the bent metal frame. There are no 3dprinted parts on it at all. So as far as i can see as long as the motherboard does not fail, the only other consumable are the drive belts. And of course at the price, it is a very good moddable platform. So even if the mobo fails, you can just stick an arduino/raspbery/wateva in and off you go.
I have replaced the linear bearings on my ones with igus drylin bearings to reduce noise and added astrosyn vibration dampers too. It is now significantly quieter. The other one had them installed by the factory on the Z-axis only.
-
Watching this thread with interest!
-
Will, if you really are tempted by this type machine. A local company I deal with sell this model.
http://creative3d.co.uk/3d-printers/wanhao-duplicator-i3
I have bought from them in the past , and buy my filament from them. Always been happy with the aftersales support they offer. Lots of information online for this printer.
Komatias, do you have any pictures of your slide bearing conversion. Getting rid of vibration always helps to improve print quality and avoiding resonant frequencies in the mechanical parts.
-
I snagged one of the Aldi machines this morning. Looks like there were only half a dozen per store. Packaging was good with lots of protective foam and the contents included an SD card with some test files, a USB cable and even a scraper to lift the model off the bed.
Initial assembly only took 15 minutes but the bed leveling was a bit more complicated especially if you follow the quick start instructions where they neglect to tell you to check that X axis is level with bed. It's in the manual but who reads manuals! After leveling the bed adjustment went well.
Plugged the SD card in, chose a model and off it went without a hitch.
If you buying one one you need to get a roll of filament as there is not much supplied in the box.
Very impressed so far.
Now to read the manual and more importantly to conquer CAD.
Woz
-
EDIT: Dang, for some reason my morning coffee has not been working correctly and the good old wetware was not up to speed yet. Nevermind my question. :)
-
Joules,
This is them inside the bearing holders:
(https://emvioeng.com/shop/wp-content/uploads/sites/3/2016/02/IMAG0330-2.jpg)
-
Ooooh cheers Komatias, do you have a link to that bearing shell, be handy for others if they fancy going that route. Be very interested in being kept in the loop on how they perform for you over the coming year.
-
I do, but I may be reprimanded for advertising....will send you a PM with the link
-
Cheers, I think they are excellent value for money and so post a link I "WASN'T" sent by Komatias, and "WON'T" credit him for the details. :thumbup:
https://emvioeng.com/shop/product/drylin-bearings-for-8mm-shaft-15mm-od/
If I get my nephew one of these printers, I think that bearing mod will be on our todo list.
-
Aluminium X carriage for prusa i3 style machines.
http://www.ebay.co.uk/itm/381482205571?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT
Igus bearings and housing.
http://www.motedis.co.uk/shop/Dynamics-linear-units/linear-bearing:::99999213_99999308.html
I highly recommend Motedis for all your aluminium extrusion requirements. Top notch quality aluminium with an outstanding range of profiles, free cutting and deburring service and millimeter precise lengths are the norm. They certainly maintain the reputation of German engineering! But they are more reasonably priced for the quality than any UK supplier I have come across even after taking shipping costs into account. No connection - just a very satisfied customer.