MadModder
Home Base => Introductions => Topic started by: NorthOf40 on May 08, 2009, 12:22:19 AM
-
Hi everyone :wave:
I found this rather awesome site after following some clues on one of Bogstandards Youtube videos.
I'm planning to hang around and learn as much as I can while I set up a little home shop based around the Sieg X2 and C2 machine. :beer:
-
No40,
I get blamed all the time for dragging people screaming and kicking to the site, but they all seem to settle in after they see what is on offer.
Just bide awhile, ask whatever you want, and post whatever you want (within reason). The chaps (and chappess), I am sure, will enjoy what you have to tell us, and will help you with whatever you need to know.
John
-
Welcome aboard :wave:
This is a good site for learning but pleas do show us what your up to and how you are putting your shop together :worthless:
And join in the banter and leg pulling and just have fun :lol:
Stew
-
Welcome to the forum!
Lots of good stuff in here as mentioned!
Look through and you will see lots of clips of various projects that will have you chomping at the bit to tackle :)
Scott
-
A welcome from me too, this is a good place to learn some new tricks :ddb:
-
No40,
I get blamed all the time for dragging people screaming and kicking to the site, but they all seem to settle in after they see what is on offer.
Just bide awhile, ask whatever you want, and post whatever you want (within reason). The chaps (and chappess), I am sure, will enjoy what you have to tell us, and will help you with whatever you need to know.
John
Thank you John.
I dunno 'bout "dragging people screaming and kicking" it was more all the shiny bits'n'pieces that ya create that temped me...
Welcome aboard :wave:
This is a good site for learning but pleas do show us what your up to and how you are putting your shop together :worthless:
And join in the banter and leg pulling and just have fun :lol:
Stew
Hi Stew,
I'll post some pics when I have something to show (I still have to make enough room to fit in a little shop)
Welcome to the forum!
Lots of good stuff in here as mentioned!
Look through and you will see lots of clips of various projects that will have you chomping at the bit to tackle :)
Scott
Hey Scott,
There is indeed much shiny goodness (I'll likely be working on machine mods and add-ons before I tackle an engine model)
A welcome from me too, this is a good place to learn some new tricks :ddb:
Ta Darren :wave:
-
Hey Jim,
Welcome to the Collective :borg:
Glad to have you here. I have both of those machines myself. Pretty amazed with what you can do with them after you have them running right. Gonna have to start paying Bogs commission!
Eric
-
Jim,
I see that the welcoming committee has done it's usual fine job of welcoming you. The only one left is our dearly beloved Ralph. I'm sure he will chime in here soon.
So what more can I say than welcome to the collective. :borg:
Regards,
Bernd
-
Clang!!!! How's that Bernd? :lol:
Hi Jim :wave: I once found myself on a forum due to Johns blatant welcoming tactics ::) :)
It's good here... Best on the interweb (IMAEBEOIS... Well thats MHO :headbang: .... Work that acronym out then! :smart: )
Pictures of what you make will be required as said (well I like to see what others make so.... ) But it is also a fun thing to show us how you make up and develope your shop :thumbup:
No doubt I'll see your posts around and add something wildly :offtopic: But hey! That's part of the fun :nrocks:
Ralph. :ddb:
-
Big welcome Jim!
I don`t do much by way of shiney. ::)
It`s nice on `ere....... :thumbup:
David D
-
Hey Jim,
Welcome to the Collective :borg:
Glad to have you here. I have both of those machines myself. Pretty amazed with what you can do with them after you have them running right. Gonna have to start paying Bogs commission!
Eric
*grin* Thank you. How's about payin' commission in lumps of metal? :thumbup:
Jim,
I see that the welcoming committee has done it's usual fine job of welcoming you. The only one left is our dearly beloved Ralph. I'm sure he will chime in here soon.
So what more can I say than welcome to the collective. :borg:
Regards,
Bernd
Cheers :wave:
Clang!!!! How's that Bernd? :lol:
Hi Jim :wave: I once found myself on a forum due to Johns blatant welcoming tactics ::) :)
It's good here... Best on the interweb (IMAEBEOIS... Well thats MHO :headbang: .... Work that acronym out then! :smart: )
Pictures of what you make will be required as said (well I like to see what others make so.... ) But it is also a fun thing to show us how you make up and develope your shop :thumbup:
No doubt I'll see your posts around and add something wildly :offtopic: But hey! That's part of the fun :nrocks:
Ralph. :ddb:
OI! :bugeye: No need to ram the chuck ta make a welcoming noise :lol:
Big welcome Jim!
I don`t do much by way of shiney. ::)
It`s nice on `ere....... :thumbup:
David D
Thank you, looks like a good place :beer:
-
Hiya Jim
Nice to have you on board mate :beer:
I'm one of the few sane one's btw .................... :lol: ............................. honest :scratch:
CC
-
Hi everyone :wave:
I found this rather awesome site after following some clues on one of Bogstandards Youtube videos.
I'm planning to hang around and learn as much as I can while I set up a little home shop based around the Sieg X2 and C2 machine. :beer:
Hi there from another newbie :wave:
I too have the C2 and X2, they can be very capable machines, but they do need a little tuning to get the best out of them.
Welcome to the madness :mmr:
Tim
-
Hi No40, welcome to the site! :thumbup:
-
Hiya Jim
Nice to have you on board mate :beer:
I'm one of the few sane one's btw .................... :lol: ............................. honest :scratch:
CC
Thanks CrewCab :wave: I believe ya 'bout yer claim of sanity...*smiles and backs sloooowly away*
Hi there from another newbie :wave:
I too have the C2 and X2, they can be very capable machines, but they do need a little tuning to get the best out of them.
Welcome to the madness :mmr:
Tim
Hi Tim :wave: Thanks for the welcome.
Hi No40, welcome to the site! :thumbup:
Hey NickG :beer:
-
Hi from another newbie (also slightly north of 40).
Looking forward to seeing what you get up to. :bugeye:
Floyd
-
Hi from another newbie (also slightly north of 40).
Looking forward to seeing what you get up to. :bugeye:
Floyd
Hey Floyd...the project maddeness will be starting real soon now... :thumbup: