MadModder

Gallery, Projects and General => The Design Shop => Topic started by: steamman on January 27, 2012, 09:15:19 AM

Title: Foden 3" scale steam wagon by T.Morris
Post by: steamman on January 27, 2012, 09:15:19 AM

 :bang:

    Can anyone tell me where I might find a full set of build instructions for this engine,The reeves2000 site says to use Model Engineer  volumes 139 & 140,however these only go up to Part 12,does anyone no why as this model is only about 50% complete .

    Any help or information regarding the build or modifications will be gratefully received.Thanks

    Also can anyone tell me how to upload photos to this site as I have had many requests to do so ,I have many digital images that I can send

Thanks steamman

Title: Re: Foden 3" scale steam wagon by T.Morris
Post by: Jasonb on January 27, 2012, 11:14:57 AM

There were only the 12 parts to the article he never did a complete build

Have a look at the top of the Gallery section for how to post photos

http://madmodder.net/index.php?board=11.0

J

Title: Re: Foden 3" scale steam wagon by T.Morris
Post by: Mike Cole on February 16, 2012, 01:42:58 PM

Have you looked at www.Tractiontalk, there might be some one on there who has build this engine.
If you do have a look, then have a look for keithcat (thats me ) Little Samson engine.

Mike

Title: Re: Foden 3" scale steam wagon by T.Morris
Post by: HS93 on February 17, 2012, 12:55:04 AM

is this the corect site http://www.tractiontalkforum.com/index.php  ?

Peter

Title: Re: Foden 3" scale steam wagon by T.Morris
Post by: Jasonb on February 17, 2012, 02:41:41 AM

Yes thats the right one, they have quite an active miniature section and the main full size forum is good as well. Though I think most on there have 4 1/2" Fodens with the odd 6" as well.


Alan Marshall's site is also useful

http://homepage.ntlworld.com/alanet.marshall1/TE-page/Foden/foden.htm

J