MadModder
Home Base => Introductions => Topic started by: Old toolie on May 01, 2012, 10:01:07 PM
-
Hi folks, stumbled across this site while looking for information on the Bonelle TCG. I'm a retired toolmaker, been in the industry for 45 years. Have been retired the past 3 years. During this time I have made quite a few projects in the shed.
Here a couple of them.
-
welcome mate this is a brilliant site.
Nice work too .....is the pistol a replica?
Pete
-
Hi Pete thanks for the welcome.
The pistol is not a replica. I made the chamber. The original was lost. Had to do bit of research to get to the finished product.
-
Hi there :wave: welcome to the cube :borg: :D
Tim
-
Welcome. This is a great place to hang out.
Jim
-
Hiya toolie :wave:
Welcome to the collective :borg:
Nice bit of work on the pistol!
Eric
-
Hi Toolie :wave:
Nice job on the chamber. I'd be interested to know how you did the ratchet affair (don't know it's proper name). I can see how you might make the grooves with the job offset and a ball-ended tool, but how did you manage the square ends to the grooves?
Andy
-
Hi Toolie :wave:
Hello and welcome to MadModder :clap: :clap: :clap:
:beer:
DaveH
-
Hi Toolie
Welcome to Madmodder :beer: :beer: :beer:
That cylinder looks very good :clap: :clap: :clap:
John
-
hi jump in and have fun
-
Hi Toolie. :wave:
Welcome to the Collective. :borg:
Lots of people here, with lots of knowledge and ideas. You'll fit in nicely...... :thumbup:
Join in. Have fun...... We do! :D
David D
-
G'Day from Perth Toolie!