MadModder

The Shop => Tools => Topic started by: krakenatwork on June 09, 2013, 11:55:34 AM

Title: procunier (dual) tapping head?
Post by: krakenatwork on June 09, 2013, 11:55:34 AM

Hi all!

    I found a dirt-cheap dual procunier tapping head; it's a dual tapping head that comes with at least 2 collets.

    Does anybody know whether one can use it to thread only one hole at a time?  From what I figure from the docs I found on procunier website (series 32000 manuals) the head seems to be a single input shaft, dual clutch (so 2 outputs completely independent from each other).

    I plan on making a tapping machine from this and a small drill press.

Thanks!