MadModder

Gallery, Projects and General => How do I?? => Topic started by: richard97 on February 26, 2013, 11:09:50 PM

Title: snap rings for mini mill
Post by: richard97 on February 26, 2013, 11:09:50 PM

hi
where do i find metic size exturnle snap rings for a mini mll. they have the tools to put them on or off but no mitrc size snap ring i tried  every hard wear store in 50 miles off me . none off them had
thank you

Title: Re: snap rings for mini mill
Post by: Brass_Machine on February 26, 2013, 11:49:22 PM

Hi Richard,

Where are you located at? That would help us direct you...

LMS (http://littlemachineshop.com/) sells spares for the mini mill. I bought a multipack from Harbor Freight for a few dollars. They have metric.

Eric

Title: Re: snap rings for mini mill
Post by: richard97 on February 27, 2013, 11:16:30 AM

hi
china snap rings are no good i live in hackensack new jersey u.s.a.
thank you
richard westerfield

Title: Re: snap rings for mini mill
Post by: Brass_Machine on February 27, 2013, 11:23:55 AM

Ahhhh. I am in N.J. as well.

If you feel like driving a little bit, you can order from McMaster Carr (http://www.mcmaster.com) and go to the will call window to pick up. If not, they will ship to you very quickly. The are off exit 8 on 195

Eric

Title: Re: snap rings for mini mill
Post by: Brass_Machine on February 27, 2013, 11:28:29 AM

You could also go to a FASTENAL (http://www.fastenal.com) store. There is one in East Rutherford and Paterson.

Eric

Title: Re: snap rings for mini mill
Post by: richard97 on February 27, 2013, 08:03:48 PM

hi
thanks a lot i should have thougt of macmasters and carr now i will order them should have them by monday
thank you
richard westerfield