MadModder

Gallery, Projects and General => Neat Stuff => Topic started by: Divided he ad on June 02, 2012, 12:03:37 PM

Title: Oil powered foundry burner!
Post by: Divided he ad on June 02, 2012, 12:03:37 PM

Saw this a few weeks ago... Contacted the lad to see if he wanted to come to the site, he has sent a messgae to say he'll come have a look but I decided to show you guys his videos.... I think it's pretty cool  :headbang:

tvtEA&index=5&feature=plcp

You will have to watch a few of them to see the alterations to the final (?) burner.... Very interesting IMHO.





Ralph.

Title: Re: Oil powered foundry burner!
Post by: tumutbound on June 02, 2012, 11:42:37 PM

Only an Australian would pour molten aluminium wearing shorts.  :clap:
Legend!

Title: Re: Oil powered foundry burner!
Post by: Divided he ad on June 06, 2012, 06:31:01 PM

Quote

Only an Australian would pour molten aluminium wearing shorts.  :clap:
Legend!

Well that Mrpete guy on you tube...Tubalcain says he? .... Well he does it too!! :doh:





Ralph.

Title: Re: Oil powered foundry burner!
Post by: yorkie_chris on June 14, 2012, 04:14:12 AM

Look on the forum "alloyavenue" there are lots like this, many ideas.

I have a "nudge" burner, atomising oil burners like this will burn waste engine oil in a cold furnace with little/no smoke when well set up. And will reach cast iron temps with enough air and a suitable furnace.

Title: Re: Oil powered foundry burner!
Post by: nel2lar on July 02, 2012, 11:45:48 PM

I watched a video on utube about pouring brass and they had no saftey in mind.
Check out this video and let me know what you think.

&feature=related
Amazing
Nelson Collar

Title: Re: Oil powered foundry burner!
Post by: Stilldrillin on July 03, 2012, 01:48:20 AM

Is this the right vid, Nelson?  :scratch:

David D

Title: Re: Oil powered foundry burner!
Post by: tumutbound on July 05, 2012, 03:22:50 AM

Perhaps this one?  Not a lot of safety gear in evidence. .

&feature=related