MadModder
The Breakroom => Resources => Topic started by: bogstandard on September 12, 2009, 02:27:20 PM
-
Machine DRO also do a very wide range of digital verniers, not usually available anywhere else, plus all those other measuring tools and bits that you have trouble getting hold of.
This is the page for the catalogue download, you will require adobe reader.
http://www.allendale-stores.co.uk/dro/info/machine%20dro%20catalogue.pdf
Plus there is a chart on there for Darren to look at, that shows the difference in specs between the budget and universal DRO display heads.
Bogs
-
Aldis have digital verniers in again from the 24th Sept. 6" ones this time with full digits too.
£8.99
-
Thanks Darren,
Time to stock up.
John
-
I'm going to put some on the lathe and mill....the lathe prob semi-permanently and the mill just for small intricate work. A sort of drop in and use as and when.
I realise they won't be as good as a proper DRO, but better than nothing for now.
-
Someone the other day was asking where to get a fractional digivern, and I can't find the post it was in.
So here is one in the UK. From the same suppliers I put a link to above.
http://www.machine-dro.co.uk/index.php?target=products&product_id=79
Bogs