MadModder

The Breakroom => The Water Cooler => Topic started by: russ57 on July 22, 2021, 09:57:41 PM

Title: Quiet around here
Post by: russ57 on July 22, 2021, 09:57:41 PM

Are you all still out celebrating your 'freedom day'?
Not been much activity recently.

(quiet and cold here, with most of the population in some sort of lockdown, and a cold winter to boot).



-russ

Title: Re: Quiet around here
Post by: awemawson on July 23, 2021, 02:26:49 AM

Not been in the workshop much recently as I have no major project on the way. Anyway it’s been unbearably hot in there for the last few days.

Title: Re: Quiet around here
Post by: tom osselton on July 23, 2021, 06:08:12 PM

I’m waiting for a viewing for a Microcut 1440 fully loaded from what I hear the fellow isn’t in good health as he battles the big C so I’ll be glad to help him out and give him one less thing to worry about.

Title: Re: Quiet around here
Post by: russ57 on July 24, 2021, 11:50:39 PM

Im nearly finished the replacement of the vfd on my mill following the demise of the first.
This time i really had to build a proper external control as the built in controls are microscopic..
Its only been 3 years, but apparently i need to reform the filter caps before loading it.



-russ