MadModder

Gallery, Projects and General => Project Logs => Topic started by: BillTodd on April 22, 2021, 12:36:08 PM

Title: 3d printed clock for model railway
Post by: BillTodd on April 22, 2021, 12:36:08 PM
3 years ago I designed a model clock for a friend's model railway. The idea was for a set of clocks that could show model time .

I opted for a cycloidal gear reduction based on  a design  by a chap here at madmodder.

I used the works expensive Objet printer to make the parts then got distracted....

The other day i found the parts again and finally put then together:

Title: Re: 3d printed clock for model railway
Post by: awemawson on April 22, 2021, 02:58:15 PM
Very neat Bill  :thumbup: