MadModder
Gallery, Projects and General => Member Videos => Topic started by: celsoari on February 01, 2020, 11:01:49 AM
-
Step by step how I build an aluminum pulley
Greetings from Brazil
Celso Ari
-
:thumbup:
-
Thank you for showing the making of the pulley from rough pattern to finished pulley. Steps were simply shown in minimum of time but I was able to follow your process.
Thanks again,
John B :thumbup: :med:
-
Thank you for showing the making of the pulley from rough pattern to finished pulley. Steps were simply shown in minimum of time but I was able to follow your process.
Thanks again,
John B :thumbup: :med:
:thumbup:
thanks Bros, greetings from Brazil
-
Very good although I did shudder a little at your bandsaw use :bugeye:
-
Very good although I did shudder a little at your bandsaw use :bugeye:
Thanks Bro