MadModder

The Shop => Our Shop => Topic started by: hermetic on October 19, 2019, 12:56:53 PM

Title: My workshop tour
Post by: hermetic on October 19, 2019, 12:56:53 PM
Hi Chaps, a workshop tour, or at least, the story so far, showing stuff I have finished, and stuff I haven't!
Enjoy, and comment and subscribe if you like it!
Phil,
East Yorkshire,
UK

&t=8s
Title: Re: My workshop tour
Post by: awemawson on October 19, 2019, 01:28:10 PM
No chance of getting bored with nothing to do then  :clap:

Very impressive amount of floor still showing !
Title: Re: My workshop tour
Post by: tom osselton on October 19, 2019, 03:58:33 PM
Nice shop!
Title: Re: My workshop tour
Post by: mattinker on October 20, 2019, 03:21:47 AM
A Big Like! (as the button don't work!)
Title: Re: My workshop tour
Post by: hermetic on October 20, 2019, 10:34:41 AM
Thanks chaps, I intend to get stuck in to the indoor work over the winter, and get these projects completed, but they are a lot more interesting than the building work I have had to do! I do feel that I am beginning to reap the rewards! On to the sunlit uplands of next spring!
Title: Re: My workshop tour
Post by: paulc1 on October 21, 2019, 04:20:14 AM
Amazing Shop and so well organised, looks like Heaven to me :)
Title: Re: My workshop tour
Post by: hermetic on October 21, 2019, 10:37:58 AM
Amazing shop.............that I can agree with, but well organised? All I can say is that it will be soon, I hope! Thanks for the kind comments!
Phil
Title: Re: My workshop tour
Post by: PekkaNF on October 21, 2019, 12:10:28 PM
Very good. Thank you for showing. That tractor is nice to have.
Title: Re: My workshop tour
Post by: hermetic on October 22, 2019, 01:37:31 PM
Thanks Pekka, It is a good tractor, starts really easy, even when it has been standing for a long time, there are a couple of problems, but minor ones, there is a small weep from the water pump, needs a repair kit, and the main one is that it doesnt charge its battery, caused I am pretty sure by having a car type dynamo on it instead of the much bigger tractor type, didnt spot this when I bought it! It is ready for a final fix up this winter, and into use next spring! Thanks for the kind words.
Phil
East Yorkshire
Title: Re: My workshop tour
Post by: PekkaNF on October 22, 2019, 01:48:09 PM
My father has one Ford 5600 and three pre war Massey Fergusons. he have been tinkering with them and few of them have got "modern" AC car alternatorss insted of shot DC generators and tampered charge circuit. I even had to turn him new pulley to allow mounting car alternator to run with A-profile V-belt. One charge problem was located to steel washer and steel bolt on copper metal stud....it did not really conduct anny reasonable amount of current.
Title: Re: My workshop tour
Post by: hermetic on October 22, 2019, 02:01:53 PM
Yes pekka, that was what I was going to do, I am pretty sure that the generator is working, but I don't think it has enough output to operate the bigger cut out that the tractor is fitted with, I will have one more try with it, then it will get an alternator, I have one off a Volvo that only needs a diode pack, could be the one!
Title: Re: My workshop tour
Post by: PekkaNF on October 22, 2019, 03:47:32 PM
Re_ Tractor not changing: engine rpm was 1/3 of car engine ....needed smaller plley than DC generator had and still would not charge on idle. Also changed the belt to cogged to work better on small pulley.
Title: Re: My workshop tour
Post by: hermetic on October 23, 2019, 01:54:01 PM
very good point Pekka!Q I will check on that, Thanks!
Phil
Title: Re: My workshop tour
Post by: PekkaNF on October 23, 2019, 02:50:19 PM
You are wellcome.

Found this old thread:
https://madmodder.net/index.php/topic,11049.msg128260.html#msg128260

Pekka
Title: Re: My workshop tour
Post by: hermetic on October 25, 2019, 05:22:52 PM
Very Interesting Pekka!  I can see me making one of those pulleys in the nearish future! I just put up my latest video about some more in depth looks at the projects in my workshop, enjoy guys!





Phil
East Yorkshire
UK