MadModder

Gallery, Projects and General => Gallery => Topic started by: celsoari on September 20, 2019, 04:21:37 PM

Title: dovetail cutter
Post by: celsoari on September 20, 2019, 04:21:37 PM

more one tool:

greetings from Brazil

Celso Ari

Title: Re: dovetail cutter
Post by: tom osselton on September 20, 2019, 07:16:07 PM

That worked out good!

Title: Re: dovetail cutter
Post by: Pete. on September 20, 2019, 08:12:23 PM

Nice one Celso. That's almost exactly how I made mine. I didn't get the clearance angles perfect but it was acceptable in use by grinding a bit of extra clearance on the insert.

Title: Re: dovetail cutter
Post by: celsoari on September 21, 2019, 02:02:11 PM

Quote from: tom osselton on September 20, 2019, 07:16:07 PM

That worked out good!

Quote from: Pete. on September 20, 2019, 08:12:23 PM

Nice one Celso. That's almost exactly how I made mine. I didn't get the clearance angles perfect but it was acceptable in use by grinding a bit of extra clearance on the insert.

thanks Bros
greetings from Brazil
Celso Ari