MadModder

The Craftmans Shop => Model Engineering => Topic started by: tom osselton on November 18, 2018, 01:40:33 PM

Title: A little light reading
Post by: tom osselton on November 18, 2018, 01:40:33 PM

A fellow on another site I go to posted this so I thought I’d pass it on just a little light reading!

https://archive.org/details/ModelEngineerVol073No1807wIndex/page/n19?q=model+engineer

Title: Re: A little light reading
Post by: millwright on November 18, 2018, 02:13:04 PM

Great Tom, thanks for passing that on, just had a browse the a few issues. I never tire of reading the old ones. my own collection starts in 1950 so I have plenty of reading to get up to where mine start. :thumbup: :clap:

regards John

Title: Re: A little light reading
Post by: krv3000 on November 20, 2018, 05:34:57 PM

brill

Title: Re: A little light reading
Post by: Doc on November 20, 2018, 07:11:26 PM

I have this book in hard cover. Always found it interesting.     Ingenious Mechanisms (http://www.opensourcemachinetools.org/archive-manuals/Ingenious_Mechanisms_Vol.1_Jones_1930.pdf)

Title: Re: A little light reading
Post by: Jo on November 21, 2018, 03:17:33 AM

Thanks guys.

I picked up the ME link elsewhere but its is always useful to make sure everyone gets the opportunity  :thumbup:


To add to George's link: there are four volumes in that set of the Ingenious Mechanisms books, you can down load each by just incrementing the volume number in the link. I have the earlier 3 volume set in hard copy, now I have the later four volume set to read  :beer:

Jo