MadModder

Home Base => Introductions => Topic started by: Nicolas Hulme on January 06, 2018, 07:49:07 AM

Title: Hello From Yorkshire
Post by: Nicolas Hulme on January 06, 2018, 07:49:07 AM

Hello,
I'm here mainly because of my interest in the work on stand-alone CNC controllers being done here but I like making things using a wide range of technologies old and new, both for fun and profit, and to paraphrase a famous motor bike engineer almost all my models are 12 inches to the foot. 
Some of the things I enjoy are bench work, forge work, casting, welding, manual machining, CNC, FDM 3D Printing and the supporting technologies to get that stuff to work,
ATB,
Nick

Title: Re: Hello From Yorkshire
Post by: krv3000 on January 06, 2018, 08:59:57 AM

hi and welcume

Title: Re: Hello From Yorkshire
Post by: Biggles on January 06, 2018, 12:32:29 PM

Hi Nick and Welcome.

Title: Re: Hello From Yorkshire
Post by: millwright on January 06, 2018, 01:15:08 PM

Hi Nick, And welcome to a fellow Yorkie. :beer:

Title: Re: Hello From Yorkshire
Post by: Karlloss on January 06, 2018, 01:23:48 PM

Hello and welcome.


Sent from my iPhone using Tapatalk

Title: Re: Hello From Yorkshire
Post by: Biggles on January 13, 2018, 02:23:48 PM

Hi and Welcome Nick.  :zap:

Title: Re: Hello From Yorkshire
Post by: krv3000 on January 13, 2018, 02:57:54 PM

Hello and welcome

Title: Re: Hello From Yorkshire
Post by: SwarfnStuff on January 14, 2018, 12:02:27 AM

Plus a hearty welcome from the upside down lot in OZ.
John B

Title: Re: Hello From Yorkshire
Post by: Nicolas Hulme on January 14, 2018, 03:41:32 PM

Thanks Guys!

Title: Re: Hello From Yorkshire
Post by: JohnC on January 19, 2018, 05:01:06 PM

Hi Nick,
Yorkshire is a big place   :thumbup: - where abouts (roughly)?
John