MadModder

Gallery, Projects and General => Neat Stuff => Topic started by: NeoTech on April 13, 2013, 11:49:13 AM

Title: For newbs with a lathe. - i found this usefull .=)
Post by: NeoTech on April 13, 2013, 11:49:13 AM

I hade a piece of 120x120x20mm barstock left that i needed to make a 110mm belt pulley out of.. So i took the opporunity to try this technique out..
the result: (http://www.roughedge.se/blogg/wp-content/uploads/2013/04/20130413-162542.jpg)

And for other lathe n00bs like me.. here is the instruction vid.. i found that PSA paper can be replaced with coarse drawing paper or similar. =)

Title: Re: For newbs with a lathe. - i found this usefull .=)
Post by: Meldonmech on April 14, 2013, 09:17:47 AM

Hi,
    An interesting post could be used to get you out of a tight spot when you have limited facilities.

                                                             Cheers David

Title: Re: For newbs with a lathe. - i found this usefull .=)
Post by: fixit on April 15, 2013, 01:09:15 PM

thanks for taking the time to post this


Stevefixit