MadModder
Home Base => Introductions => Topic started by: drmico60 on August 09, 2013, 01:53:59 PM
-
Hi everyone,
I have been an avid reader of this forum for several years but I have never bothered to actually join before. I am prompted to join because I wish to add my condolences following the death of my friend Andy Franks, may he rest in peace.
I have an X1 minimill and a 7x 12 minilathe. Andy inspired me to develop my own website and he read and commented on every page that I posted. Many of you may know my website http://mikesworkshop.weebly.com/index.html since Andy had mentioned it several times especially regarding the swing up toolholder and rotary broaching.
I look forward to taking an active role on this website.
Mike
-
Welcome to MadModder Mike. Andy pointed me in the direction of your website more than once - obviously (and rightly) a fan of your work.
Look forward to seeing more of it here :)
-
Mike
My condolences on the loss of your friend Andy.
Welcome to MadModder. I have also followed the link to your site on many occasions. We look forward to your participation in the various forums.
Don
-
Mike I also have learned much from your site -- your comments here will be much appreciated. I'm very sorry for the loss of your friend, and fellow member here.
-
Hi and welcome to us :wave:
-
Hi Mike, very Welcome!
Have read through your web pages with great interest. Your work is really inspiring!
BR
/Peter
-
Hi Mike and welcome,
I have only been a member here for six months but as Andy was one of the nearest forum members to me I always hoped to meet him sometime. Such a shame. Your contributions will be welcome. I've read quite a lot of your web site as I too have a mini-lathe and am keen to learn.
Gary
-
Hi Mike,
Welcome to Madmodder, thanks for your help in the past re furnace refractory.
Cheers David
-
Hi Mike,
Welcome to the collective :borg:
I have gone to your site several times. In fact, it helped me make the decision to order the RealBull spindle for my 7x10 ( those curious, Mike's post is HERE (http://mikesworkshop.weebly.com/headstock-upgrade.html).)
I look forward to you being here.
Eric
-
woot! mike from the workshop. :bow:
I cant really say how many times i have read that site from one end to the other and backwards. Welcome! =)
-
Thank you all for the very warm welcome to this site.
Mike
-
hi and welcume