MadModder
Gallery, Projects and General => Member Videos => Topic started by: Jim Dobson on May 24, 2021, 12:31:56 AM
-
Home Made Steam Driven Trip Hammer doing some work flattening out 1.5mm and 3mm thick wire solder.
This is fun steam driven accessory to use, a bit hard on the ears though!
-
:thumbup: Just thinking about your hammers and the fact that they simply drop onto the work-piece it might be worth adding more mass to the hammers?
That is naturally going to depend on whether the lift mechanism can cope. PLUS, I do realise this is a model and not a tool as such.
Great job and noisy fun to watch.
Oh, I did turn the volume in the downward direction.
Regards,
John B
-
:thumbup: Just thinking about your hammers and the fact that they simply drop onto the work-piece it might be worth adding more mass to the hammers?
That is naturally going to depend on whether the lift mechanism can cope. PLUS, I do realise this is a model and not a tool as such.
Great job and noisy fun to watch.
Oh, I did turn the volume in the downward direction.
Regards,
John B
LOL G'day John I don't blame you turning the volume down. I think I've done some more damage to my hearing with this trip hammer :)
Appreciate the comment cheers.
-
You could use a sliding weight on the arm.