MadModder

The Breakroom => The Water Cooler => Topic started by: Will_D on September 03, 2016, 10:36:14 AM

Title: Bon Voyage Bonny Lad
Post by: Will_D on September 03, 2016, 10:36:14 AM

As some of you know our DoubleBooster, John, is selling T-shirts to help fund his trip to the USA next year.

He is a regular here and of course his you tube channel is superb.

I thought it would be a good idea to plug the Tees a bit more here and also show you what my lathe and me look like!!

Cheers John, the Tees are great quality!

Will Davis, Dublin, Ireland

Title: Re: Bon Voyage Bonny Lad
Post by: ieezitin on September 03, 2016, 10:54:26 AM

Great your doing the exposure.... i was planning to purchase a T-Shirt from him very soon... i am going to zip him off a message before he comes over to USA Inc and see if i could meet up with him and share a Nuke-Brown ..

I see you suffer from the same problem i have..... your lathe slinging shite on the white painted back wall..

Anthony.

Title: Re: Bon Voyage Bonny Lad
Post by: inthesticks on September 03, 2016, 11:31:59 AM

Nice lathe Will only outshone by the fine specimen standing beside it  :). Have always kept an eye out for a Myford but their rare this side of the pond, classics like the South Bends.

Cheers
CB

Title: Re: Bon Voyage Bonny Lad
Post by: Brass_Machine on September 03, 2016, 02:58:16 PM

Wait... What? States trip? Shirts for sale?

Ok. I am clearly lost.

Title: Re: Bon Voyage Bonny Lad
Post by: kayzed1 on September 03, 2016, 03:36:48 PM

Yes more info please Will.
Not seen many posts from John lately..
Lyn.

Title: Re: Bon Voyage Bonny Lad
Post by: NormanV on September 03, 2016, 04:45:17 PM

Brass machine and kayzed you obviously don't follow his entertaining and educational Sunday Night Night Cap videaos on Youtube.

Title: Re: Bon Voyage Bonny Lad
Post by: Brass_Machine on September 03, 2016, 05:23:25 PM

Hi Norman...

I definitely should. I barely have time to log onto here and do any work... I need to re-arrange some of my priorities!