MadModder

Gallery, Projects and General => Project Logs => Topic started by: kvom on March 31, 2011, 06:22:41 PM

Title: Switch panel for the Jeep
Post by: kvom on March 31, 2011, 06:22:41 PM

Banged this out on the CNC Mill this morning.  First time with the engraving bit I bought a year ago.  Top row of holes are for LEDs, middle row for switches, bottom row for breakers.

(http://www.pbase.com/kvom/image/133577781/large.jpg)

Title: Re: Switch panel for the Jeep
Post by: Bernd on March 31, 2011, 06:26:20 PM

Nice :thumbup:

Title: Re: Switch panel for the Jeep
Post by: kvom on March 31, 2011, 08:15:35 PM

This is the bit I'm using: http://www.soigeneris.com/PreciseBits_Trace_Isolation___Engraving_Tools-details.aspx