MadModder
The Breakroom => Resources => Topic started by: SemiSkilled on December 18, 2010, 08:25:10 PM
-
Just found this,
http://www.bmotorsports.com/faq/drill-bit-sizes-conversion/
drill sizes in order No, letter, metric, imp
Lee
-
Hi Lee
That one has more listed than the one I have been using. Thanks, it already came in handy. I was looking for a drill just a little over .325... was going to go with a 21/64 but the 8.3mm is closer to what I want.
Eric
-
Down loaded and printed, Thanks. :nrocks:
Dave