MadModder
The Shop => Electronics & IC Programing => Topic started by: tom osselton on February 14, 2014, 02:57:25 PM
-
I've picked up a uno r3 and am slowly figuring it out for those that have check out this.
MakerPlot is Windows® software for plotting analog and digital data generated by your microcontroller and other devices with ASCII serial outputs. No proprietary hardware is required – just a serial connection from your microcontroller or other device to your PC – that’s it!
http://www.makerplot.com/home.html
-
I'm pretty Dutch when it comes down to it, why not just have the arduino log to a .csv and then manipulate the data in excel?
I'm no arduino expert, but I do have one laying around waiting for the right project.
Good luck learning!