MadModder

Gallery, Projects and General => Neat Stuff => Topic started by: dsquire on May 09, 2010, 11:44:30 PM

Title: If You Can Draw It In 3D, They Can Make It.
Post by: dsquire on May 09, 2010, 11:44:30 PM

Hi Gang

While browsing another forum I came across an interesting subject. It is printing in 3D in plastics or Stainless Steel. Here is the link for it.

http://www.shapeways.com/

Check it out and look around the site. You can even get your own custom designed parts made at what appeared to me to be somewhat reasonable. 

Cheers  :beer:

Don