MadModder
The Breakroom => The Bookshelf => Topic started by: Yankee Tom on November 23, 2015, 01:04:43 PM
-
Shop Theory is a bound collection of lesson sheets prepared by instructors in the Henry Ford Trade School for use in their classes.
Hand tool use, shop math, milling, all the usual suspects are here.
It may be found in used book shops, or on line. Lindsay Publications did a reprint of it.
Mine is an original, dated 1941. Its original owner identified himself as an Apprentice Seaman at Great Lakes naval training base, so I guess the navy liked the book, too.
Tom
-
Hi Tom , yes it's a canny book :thumbup:
Mr Ford even teaches the difference between a rule and scale and covers a wide range of subjects including knurling , maybe professor yaffle should read it ,back then there was no need for a computer program to knurl a bit bar , it's akin to needing a computer program to put your socks on in the morning :coffee:
Rob
-
Hi, Rob.
Makers such as Starrett and B&S call them rules in their catalogs. Maybe the reason machinists call them scales is to eliminate any comparison with the cheap, nasty wood or plastic RULERS we used in school.
Tom