MadModder

The Shop => CNC => Topic started by: tonyho810 on November 26, 2019, 12:07:53 PM

Title: Manual tool change help ddcsv
Post by: tonyho810 on November 26, 2019, 12:07:53 PM

Hi,

Can anyone help please. I'm trying to do a manual tool change on my home made router driven by ddcsv2.1. I'm using Fusion360 and trying various post processors.  As far as I can work it out the post inserts M06 in the code and the ddcsv goes off and runs the t.nc macro. Is that correct? I'm stuck with the t.nc macro, what do i put in it? If someone has already generated on could you share it please? I put a post on the official forum but no response.

Thanks,

Tony

Title: Re: Manual tool change help ddcsv
Post by: Will_D on November 27, 2019, 04:54:53 AM

Please read this:

Title: Re: Manual tool change help ddcsv
Post by: Will_D on November 27, 2019, 04:57:08 AM

I should include more about T.nc in that file, but here is what it contains:

G04P0
M110
G91 G92 Z#[767+#592]-#[767+#593]
#592 = #593

Hope this helps

Will

Title: Re: Manual tool change help ddcsv
Post by: Will_D on November 27, 2019, 05:34:40 AM

There is also a Facebook group that is pretty responsive

https://www.facebook.com/groups/1724999967517167 (https://www.facebook.com/groups/1724999967517167)

Here you will in the files section the latest user manual and a version description document as well as other useful stuff

Will

Title: Re: Manual tool change help ddcsv
Post by: tonyho810 on November 27, 2019, 06:18:51 AM

Thanks Will,

I rememered in the middle of the night that  unix is case sensitive and I had been using t.nc instead of T.nc. That combined with the code you posted will fix it I'm sure

Thanks again,

Tony