MadModder
The Shop => Tools => Topic started by: Pigi on May 22, 2017, 06:40:11 AM
-
I've published a new page for my blog that could be of interest.
http://pigi-machinering.blogspot.it/2017/05/a-diy-bandsaw-for-shop.html (http://pigi-machinering.blogspot.it/2017/05/a-diy-bandsaw-for-shop.html)
Here the basic arrangement.
I hope I'm not violating any rule by publishing the link. As I told it's easier for me to keep everything inside a post.
If I'm violating I will try to arrange differently.
Cheers
Pigi
-
Very nice work! :thumbup: And a great write-up too.
Maybe a photo here of the finished article to inspire others to click the link? Just a suggestion...
-
Ade,
it seems a very good idea ! :doh:
Here she is ( finish "product" ):
Pigi
-
It looks very finished compared to my work....usually all the stuff I make takes few iterations and rebuilds and if it works fine it might get paint in about five years.
Pekka
-
Very nice work! :thumbup: And a great write-up too.
Maybe a photo here of the finished article to inspire others to click the link? Just a suggestion...
Links and videos are fine. But, Like Ade sates, a picture(s) and text help encourage people to look. And as we are a discussion board, be prepared for discussion here about the link.
Looks good!
Eric
-
I built the same one from the Model Engineers Workshop magazine, it was was in one of the very early issues. must be abouut 20yrs ago now. and it gets a lot of use. Made a few slight mods to it in the building stage, only thing was i built 5 at the same time for four other friends. no idea if the others are still in use i lost contact with them. Ill see if i can get some pics posted over the next few days.
John