MadModder

Gallery, Projects and General => How do I?? => Topic started by: jamesemery728 on January 22, 2011, 07:27:12 PM

Title: Making a Phase 2 QCTP 100 Series Tool Holder
Post by: jamesemery728 on January 22, 2011, 07:27:12 PM

Hi All, I need to make another tool holder and I don't have any dove tail cutters. I know that the angle needed is 60 degrees but I am not sure of the diameter and the width that I need to order to make the dovetail for the 100 series. Since I don't own any dovetail cutters and have never ordered any, can someone give me some advice so that I order the correct size. Thank you in advance.

Title: Re: Making a Phase 2 QCTP 100 Series Tool Holder
Post by: 75Plus on January 24, 2011, 08:28:33 PM

Have you seen CDCO's prices for series 100 or AXA holders?

http://cdcotools.com/

You can hardly buy the raw material for what they get for a complete holder.

Joe