MadModder
Gallery, Projects and General => Project Logs => Topic started by: PhiberOptix on October 05, 2009, 02:08:08 PM
-
Disaster the plastic clutch selector broke
(http://i628.photobucket.com/albums/uu7/phiberoptix/SP_A0465.jpg)
so had to make a new one this time from mild steel
drilled out the bulk of it
(http://i628.photobucket.com/albums/uu7/phiberoptix/SP_A0461.jpg)
bored out and knurled
(http://i628.photobucket.com/albums/uu7/phiberoptix/SP_A0462.jpg)
Drilling the screw holes in a dividing head
(http://i628.photobucket.com/albums/uu7/phiberoptix/SP_A0463.jpg)
countersinking the screw holes
(http://i628.photobucket.com/albums/uu7/phiberoptix/SP_A0464.jpg)
and fitted back on and packed with grease
(http://i628.photobucket.com/albums/uu7/phiberoptix/SP_A0466.jpg)
now I can use my machine again ;)
-
Isn't it great when you can fix your own machines ...... :clap:
-
Isn't it great when you can fix your own machines ...... :clap:
I was gutted when it happened as without it I could not use my machine
not even to make a replacement
but luckily enough my m8 has a full engineering workshop
so was able to go over to his an make a new one
-
Nice fix :thumbup:
and well done :beer:
CC
-
Good repair Andy
I've got a 3 in 1 I may just make myself a spare one of those before I'm left without a machine
Cheers
Stew