MadModder

Gallery, Projects and General => Project Logs => Topic started by: doubleboost on August 17, 2013, 05:32:25 AM

Title: Deviding Head Part Eleven more boring
Post by: doubleboost on August 17, 2013, 05:32:25 AM

Title: Re: Deviding Head Part Eleven more boring
Post by: Bigbadbugga on August 17, 2013, 06:45:22 AM

Ooohhhhhh, you spoil us with two videos in two days.

Kettle on :)

Title: Re: Deviding Head Part Eleven more boring
Post by: PeterE on August 17, 2013, 07:33:05 AM

This is not boring at all, it is highly interresting - keep e'm coming!  :thumbup:

In fact, this is a task that I am going to do in a while as I am trying to get a VDH for my C3/SX1L combination. I will use the GHT VDH as base and go from there.
This is how far I am at the moment.
(http://i577.photobucket.com/albums/ss219/H0n3/Tooling/C3-VDH/PEVDH-01.jpg)

So more videos please  :drool:

/Peter

Title: Re: Deviding Head Part Eleven more boring
Post by: ParCan on August 17, 2013, 11:57:18 AM

Doubleboost
Your Video's are an inspiration. I'm well on the way with my small dividing head.
Body is bored. Bearings are made. Spindle I completed today.

I'm now trying to get a 2mm slitting saw through it, preferably without blowing up the Mill Motor again !

Thai is the Dividing head from the workshop books.

Title: Re: Deviding Head Part Eleven more boring
Post by: paulmo101 on August 17, 2013, 03:13:43 PM

Gret videos again John.

Any chance of a couple of pics/drawings of the tool bit in the boring bar.  Looking for info on how to sharpen broken drills/mills etc. to use in a similar manner.

Cheers

Paul