MadModder

The Shop => Tools => Topic started by: Nickon51 on July 15, 2009, 11:37:42 PM

Title: Fly cutter shape.
Post by: Nickon51 on July 15, 2009, 11:37:42 PM

Does anyone know how to correctly sharpen a fly cutter. I have an X2 mill plus a nice looking flycutting holder, however the cuts that I am getting are a bit rough. Not nice at all. Here is the one that I have made. Its 5/16 sq HSS

Title: Re: Fly cutter shape.
Post by: sbwhart on July 16, 2009, 01:13:53 AM

Hi

If you follow this link http://madmodder.net/index.php?topic=850.0 ther's a very good thread by John Bogstandard on flycutter shape.   :mmr:

Hope this helps

Stew