MadModder
Home Base => Introductions => Topic started by: kankarrio on October 16, 2020, 02:26:33 PM
-
Greetings to all from Spain
I apologize for my English, I use a translator
searching the web http://pandora-cnc.eu/
cnc system information ddcsv has directed me to this forum
I feel that because of the language I will not be very active, I have been looking to resolve doubts about the ddcsv
In Spain I am very active in the http://forometalaficion.com/foro/
thanks to everyone
-
Hi and welcome!
No apologies needed. You aren't the first to use a translator to join discussions. We will make do!
Eric
-
kankarrio:
Welcome to the forum. Your English would not be any worse than my Spanish, because I would have to use a translator just like you.
Earlier this year I bought a DDCSV for use in a CNC router that I am building. I cannot tell you how it is working because I have not been working on that project for a while, I really need to get back to work on it.
There is a thread on this forum about the DDCSV that spans several years, and after talking with them I have high hopes for my project. Let us know how yours works out.
Don
-
Welcome aboard!
My DDCSV runs my cnc router successfully. I really need to update the firmware; there is mistake in one direction of circular interpolation.
I do my gcode processing with short segments rather than true curves.
Sent from my SM-G892A using Tapatalk
-
thanks to everyone
Weldingrod I had the same problem in my ddcsv2.1 and I changed a parameter in the aspire and it was solved