MadModder
Gallery, Projects and General => How to's => Topic started by: Meldonmech on December 16, 2012, 05:45:19 AM
-
Hi
I need to make some belts from abrasive strip, can any one advise re. joint preparation and adhesives.
David
-
Hi David
have a look at this :med:
Rob
-
Hi Rob
Thanks for the link, have just placed an order with ebay for the reinforced tape.
David
-
Hi David
Lets no how you get on with the belt joining :thumbup: ,,, mined when that tape gets old it sheds glass fibber partials when you unwind it from the roll , very itchy .
Rob
-
Hi Rob
Finally got round to repairing an abrasive belt. This one had pulled away on the original scarf joint, so stuck it back together with clear Bostick and re enforced the back with the tape, working well.
Cheers David
-
Result David :thumbup:
I was toying with the idea of building a small belt linisher .
Rob
Edit : tit , forgot to attach file .
-
I was toying with the idea of building a small belt linisher .
Rob
What ? You havent got a linisher in your 'shop..... :coffee:
I am surprised....You got everything else in there..Bit like Mary Poppins is your workshop... :D
-
:lol: :lol: I have John ,,,, the type with 4"wide belt with the disc on the side , hardly use it , probably stick it up for grabs when i can get to it , I was thinking that a 1"or 2" wide , long belt type would be of more use .
Rob
-
Rob,
I have a small 1in wide one ( the sort from Machine Mart ) and its good for taking the corners off small lumps of metal, quicker than using a cutter in the mill....... :dremel: