MadModder

The Shop => CNC => Topic started by: Kev0 on September 26, 2018, 09:57:10 AM

Title: DDCSV 2.1 Probing Issue
Post by: Kev0 on September 26, 2018, 09:57:10 AM
Hi there,

I have some serious problem with my z-probe. It wont work anymore after updating to the original r100 release of the firmware.
The pandora wont do it as well.
Btw. is there a way to delete the pandora [dir]'s ?

Regards

Kevin