Yes - Already removed with Allen Key - Still tight to remove :lol:
anyone know how to get pics were you want not just at bottom? sorry im newHi Dan,
Back to Work!!
We turned down the diameter on the bar to allow us to thread it (http://i1058.photobucket.com/albums/t405/Toptracks3719/002.jpg). Then we Araldited the small bar into 2 bigger bars then screwed on the handles.
(http://i1058.photobucket.com/albums/t405/Toptracks3719/004-1.jpg)
Right remember how we needed a spring we got one out of a cracker and it is the right size and tension. but first I learnt the party trick.
(http://i1058.photobucket.com/albums/t405/Toptracks3719/007-1.jpg)
2 minor jobs to complete the project.
did it happen for post 33 and Dose it happen on anyone else's? its normal on mine
did it happen for post 33 and Dose it happen on anyone else's? its normal on mine
Reply 33 is the same for me - no images - just rectangles with nothing in them but a red cross in the corner. I can't speak for anyone else but I just tried looking at your posts on my wife's iPad and can't see the images on that either.
Cheers.
Phil.
did it happen for post 33 and Dose it happen on anyone else's? its normal on mineHi again,
Good Job::
Am I missing something? What are you using to hold the taps?
I all ways dreamed about finding a four jaw 1/2 inch drill chuck.
Ivan
Good Job::
Am I missing something? What are you using to hold the taps?
I all ways dreamed about finding a four jaw 1/2 inch drill chuck.
Ivan
I had the same dream. I had to make my own 4 jaw tap chuck, see:
http://mikesworkshop.weebly.com/improved-chuck-for-taps.html
Mike