MadModder
Gallery, Projects and General => Gallery => Topic started by: wheeltapper on June 03, 2010, 12:20:34 PM
-
Well why not, everyone else seems to be making them :D
(http://i293.photobucket.com/albums/mm72/wheeltapper_2008/ballturner.jpg)
and here's a sample on a 6mm rod just to see if it worked.
(http://i293.photobucket.com/albums/mm72/wheeltapper_2008/sampleball.jpg)
the first ball made properly will be the one on the handle.
mind you, I think I'll use the collet chuck when using this tool, it comes perilously close to the chuck jaws :scratch:
cheers
Roy
-
Nice one Roy :thumbup:
Double tipped too.... Most enjoyable shapes to be made IMHO.
Yup, got to watch those jaws when doing work close in. I always turn the chuck by hand with the tool in it's extreme positions to make sure it is safe..... Learned from experience :wack:
Don't be stingy with the photo's of the finished article and bits you make.... We all likes piccys :)
Ralph.
-
Yup, what Ralph said. :thumbup:
Bernd
-
hello
Clearance was an issue for me. Built mine low and mean :)
-
thanks for the comments guys.
here's the finished article, complete with ball handle.
(http://i293.photobucket.com/albums/mm72/wheeltapper_2008/P6060001.jpg)
now what else can I fit balls onto.............................. :lol:
cheers
Roy
-
I started working on one yesterday, I need to make a base that will mount to the compound of my Atlas/Craftsman so I can have enough room to make some big knobs..
Those look good...
Steve W