MadModder

Gallery, Projects and General => Member Videos => Topic started by: Bridie on April 22, 2023, 06:09:58 AM

Title: Single point threading with compound at zero degrees without plunge cutting.
Post by: Bridie on April 22, 2023, 06:09:58 AM

Here is a video showing how to cut various threads on a centre lathe without setting the compound slide but still using one or both tip flanks.
https://drive.google.com/file/d/13cCJMpAdXYO-t8c4tuP8-f87NCgbC5oc/view?usp=share_link
It's a bit long, probably worth playing at increased speed.

This diagram shows the theory.
https://drive.google.com/file/d/19TvqzOM-Czqy3TiQ3a1j0hdUFpLPIxUT/view?usp=share_link

Any use to anyone?

Title: Re: Single point threading with compound at zero degrees without plunge cutting.
Post by: philf on April 22, 2023, 04:21:11 PM

Hi Bridie,
I do the same generally but with full form carbide tools I've not bothered and still get excellent results.
Phil.