MadModder

Gallery, Projects and General => Gallery => Topic started by: snub on November 11, 2017, 09:19:21 PM

Title: Another Ball Turner...With An Added Feature
Post by: snub on November 11, 2017, 09:19:21 PM

I motorized it.

The height of the handle was causing pain in my old arm and shoulder, so I put a motor on it. It's a 15 RPM 12 Volt gear reduction motor hooked up to PWM so I can slow it right down and get some nice finishing passes on the workpeace.

.

Title: Re: Another Ball Turner...With An Added Feature
Post by: snub on November 11, 2017, 09:23:04 PM

The exciting video:

Title: Re: Another Ball Turner...With An Added Feature
Post by: PK on November 12, 2017, 01:15:17 AM

:-) Good stuff!

Title: Re: Another Ball Turner...With An Added Feature
Post by: Joules on November 12, 2017, 12:16:09 PM

Nice, but I would want something to protect the belt from swarf.