MadModder

Gallery, Projects and General => Gallery => Topic started by: wheeltapper on October 19, 2012, 06:52:54 AM

Title: Another use for my bandsaw sub base.
Post by: wheeltapper on October 19, 2012, 06:52:54 AM

Hi
Remember the base I made to hold small things in the bandsaw?
(http://i293.photobucket.com/albums/mm72/wheeltapper_2008/model%20engineering%20stuff/Bandsawsubbaseinplace.jpg)

I have been making a fixed steady
(http://i293.photobucket.com/albums/mm72/wheeltapper_2008/model%20engineering%20stuff/fixedsteady.jpg)

and a travelling steady ( not quite finished)
(http://i293.photobucket.com/albums/mm72/wheeltapper_2008/model%20engineering%20stuff/travellingsteady.jpg)

and I needed to hold the brass fingers on the mill to shamfer the corners off so I came up with this
(http://i293.photobucket.com/albums/mm72/wheeltapper_2008/model%20engineering%20stuff/subbaseonmill1.jpg)

I think this is turning out to be a useful little gadget.

Roy.

Title: Re: Another use for my bandsaw sub base.
Post by: Stilldrillin on October 19, 2012, 12:07:59 PM

That's turning out to be a handy piece of kit, Roy!  :thumbup:

David D

Title: Re: Another use for my bandsaw sub base.
Post by: Blue Chips on October 20, 2012, 10:01:43 AM

That base looks to be very useful and not difficult to make, that's a great combination to my thinking.

Ken