MadModder

The Shop => Tools => Topic started by: Stilldrillin on May 01, 2009, 12:33:03 PM

Title: Sticky Pin.
Post by: Stilldrillin on May 01, 2009, 12:33:03 PM

Of all the hints and tips I have seen over the past months, no one has mentioned a sticky pin! ::)

The humble sticky pin is invaluable for finding the centre of components in the milling machine.

Just a handy pointer, made from a length of wire and a piece of blue tac, or plasticine.

Stick it onto any hand rotatable spindle part........

(http://i110.photobucket.com/albums/n95/Dayjo/p5010002.jpg)


(http://i110.photobucket.com/albums/n95/Dayjo/p5010005.jpg)


(http://i110.photobucket.com/albums/n95/Dayjo/p5010003-1.jpg)


(http://i110.photobucket.com/albums/n95/Dayjo/p5010004.jpg)


And when you`ve done with it, for now.......


(http://i110.photobucket.com/albums/n95/Dayjo/p5010008.jpg)

It sticks onto the machine, so it doesn`t get lost!  :thumbup:

David D

Title: Re: Sticky Pin.
Post by: sbwhart on May 01, 2009, 12:38:03 PM

Ho I like that one Dave  :thumbup:

I'll stick it away for future reference  :D :D :D

Have fun

Stew