MadModder

Gallery, Projects and General => Gallery => Topic started by: ddoyle on May 30, 2014, 03:43:36 PM

Title: My first MINOR mod for my HF 7x10 mini lathe...
Post by: ddoyle on May 30, 2014, 03:43:36 PM

I realized very quickly that I was going to have to come up with some solution to keep chips out of the gears and halfnut.  Nothing major but I think it will serve it's purpose.  I also just used silicone to hold it in place, for easy removal if I need to take it off for any reason.

Title: Re: My first MINOR mod for my HF 7x10 mini lathe...
Post by: Chuck in E. TN on May 30, 2014, 03:52:18 PM

I did that mod also as my first project. Well done.
Chuck

Title: Re: My first MINOR mod for my HF 7x10 mini lathe...
Post by: Brass_Machine on May 30, 2014, 04:14:52 PM

Nice job. I actually need to do that one too.

Title: Re: My first MINOR mod for my HF 7x10 mini lathe...
Post by: Tinkering_Guy on August 13, 2015, 05:45:37 PM

This was one of my first mods, too, although mine's a Cummins.  same source in China, though, I think.  The link goes to Flickr, and should be public; the detailed description is there.

https://www.flickr.com/photos/rous/2610197151/in/album-72157605051531512/ (https://www.flickr.com/photos/rous/2610197151/in/album-72157605051531512/)

Failing that, I'm attaching the image itself.

Title: Re: My first MINOR mod for my HF 7x10 mini lathe...
Post by: Stilldrillin on August 14, 2015, 05:28:50 PM

Well done. My first mod, too!  :thumbup:

First of many.........  :palm:

David D