MadModder
The Shop => Electronics & IC Programing => Topic started by: Rob.Wilson on October 16, 2011, 09:04:52 AM
-
Hi Chaps
any idea were i could get a key board that i could mount on the front of an enclosure ?
Rob
-
Rob,
Do you mean a std pc style k/b?
I think not......and needs to be IP rated?
-
Rob,
Do you mean a std pc style k/b?
I think not......and needs to be IP rated?
hi John
yes that what i was after ,,,,,,,,,,,,,, whats IP rated ?
Rob
Just GOOGLE "IP rated " ,,,,,,,,,,, no such regs in my shop :lol: :lol:
-
Rob, would one of these do the trick?
http://www.memorybits.co.uk/shop/keyboards/roll-up-keyboard-(black)-urk100/8275
Andy
-
Hi Andy
Now that looks just the job :thumbup: ,,,,,,,,, i could stick that to the front panel :dremel:
Cheers Rob :)
-
HI we got the ones used in the university from RS
-
Rob, would one of these do the trick?
http://www.memorybits.co.uk/shop/keyboards/roll-up-keyboard-(black)-urk100/8275
Andy
Now why didn't I think about this when I was looking at the in a shop the other day?
Thanks for putting two and two together!
Regards , Matthew
-
I used one of those roll up jobs when I converted a Denford lathe to more modern PC cnc control, but I found them rather flakey. Sometimes worked, sometimes didn't. I tried three different ones with vaaying sucess. Good concept though when your hands are oily and there's swarf in the air.
-
I've used one on my mill/drill cnc for over 10 years with no problems :thumbup:
"http://www.memorybits.co.uk/shop/keyboards/roll-up-keyboard-(black)-urk100/8275 "
-
Cheers for the input lads ,much appreciated :headbang:
I have one on order .
Rob
-
It's now 9 months later, so you've evidently been giving this aspect a lot of :coffee: :scratch: :scratch: :smart: , Rob.
Andy
-
It's now 9 months later, so you've evidently been giving this aspect a lot of :coffee: :scratch: :scratch: :smart: , Rob.
Andy
:lol: :lol: :lol: :lol: Hi Andy ,,,,,,,,nope just slow :lol: :lol: :lol: :lol:
Rob