MadModder
Gallery, Projects and General => Gallery => Topic started by: Gerhard Olivier on October 05, 2009, 03:24:41 PM
-
Just to let u all know I finally made a runner. And broke the crankshaft and fixed it again.
The first one was 2 part fixed with superglue??? My four year old loved the engine so much it did not last an hour. I then made the replacement by turning it out of as solid piece in the four jaw chuck--seems fine so far.
(http://i608.photobucket.com/albums/tt161/geroli/DSC_0020.jpg)
FLywheel is 16mm diam and 4.5 wide.(forgot to put somthing for scale.)
Gerhard
-
Nice 1 Gerhard well done on making a runner! :bow: :beer:
Like the oversized base ... it's certainly different!
Nick
-
geroli
Good little engine. Sounds like your 4 year old has got him a new toy. Now you are going to have to build another one for yourself. :lol: :lol:
Cheers :beer:
Don
-
Good one Gerhard :clap: :clap:
Your young son will treasure that engine, I've still got the steam engine my father gave me a long long time ago.
Have fun
Stew
-
THanks for the nice comments.
Nick plan with the oversize base was to have a controll valve in the middle of the pipe. Dont think Sean would let me have it back to make the valve.
Don I hope to make one of my own design later but a lot of tools on top of the list.
Gerhard
-
Nice job! Love making things for my children!
Eric