MadModder
The Shop => Tools => Topic started by: AdeV on May 10, 2012, 04:33:05 AM
-
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=150812846169
Looks almost like an artistic headstock with built-in chuck, but surely it has a specific use?
-
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=150812846169
Looks almost like an artistic headstock with built-in chuck, but surely it has a specific use?
Dunno. But if it's an advert for Scotchbrite, it's not very convincing ... :scratch:
BC
-
:scratch: If I had such a thing I'd assume it would be screwed down to a fixed bench and then used to hold and twist bars in conjunction with a fixed vice.
Well, that's what I'd try to do with it! :borg:
I suppose it could be an early form of 4th axis MNC (Manual Numbery Machinering!). ? :)
Still looks cool :thumbup:
Ralph.
-
It looks like the chuck does not turn? But it has a handle on the end?
Maybe if you take the handle out there is a fitting in there to hold a threading die. You put a round piece in the chuck then turn the handle to form a thread on the end? Maybe it uses a tap and puts an internal thread in the end of the workpiece. :scratch: