MadModder

Gallery, Projects and General => Project Logs => Topic started by: jonesie on October 15, 2012, 12:31:19 PM

Title: jonesie's simpson and shipson
Post by: jonesie on October 15, 2012, 12:31:19 PM

here is a picture of my progress so far on this engine ,designed by stew.coming along real good just a lot of little parts.hope to cut the radius for the shaft in the large brass piece side plates and then turn the flywheel. think i will hold the flywheel on with a taper lock and key way.stew thanks again for the plans think i have all that i need. jonesie

Title: Re: jonesie's simpson and shipson
Post by: jonesie on January 28, 2013, 09:44:00 AM

here are a couple of pics of my shipton. it is done as far as parts build but now  the tough part of all the little fitting and get it timed, it is a little tricky and tough for old stiff fingers but we will get it done, then a video.thanks for looking jonesie

Title: Re: jonesie's simpson and shipson
Post by: sbwhart on January 28, 2013, 12:07:13 PM

Great Job  :thumbup:

Thank looks a nice fly wheel with curved spokes.

Stew