MadModder
Gallery, Projects and General => How do I?? => Topic started by: mattinker on December 29, 2012, 06:01:46 AM
-
Hi,
I'm looking for an MJ 7/8 bearing. I was searching the web, looking for somewhere not to expensive that would post to France, when I came across a reference to a 9/16" wide as opposed to an 11/16" is this a typo or are there different widths? I would very much like to order the spindle bearings for my Clarkson MKI before taking it apart.
I thought it would be easy to find something like a cross-reference chart or standard size bearing chart! No such luck!
Thanks in advance, Matthew
-
any good Matthew http://www.bearingmfgco.com/mj_series.html SKF , FAG
Rob
-
Thanks Rob, that's exactly what I was looking for. It would appear that the 9/19 width for for the MJ7/8 bearings is a typo!
Thanks again, Matthew
-
I have found
https://simplybearings.co.uk/shop/login.php
incredibly help full.
Trev
-
Thanks Trev,
I was looking for confirmation that 9/19 width for for the MJ7/8 bearings is a typo!
I'll try simply bearings too,
thanks again, Matthew