MadModder

Home Base => Introductions => Topic started by: Richard Lee on July 31, 2015, 05:36:48 AM

Title: Hi from the English Lake District
Post by: Richard Lee on July 31, 2015, 05:36:48 AM

Hi from a complete newbie and recent purchaser of a Myford ML7.

I've recently begun restoring British motorcycles - my current project is a Matchless G2.  I'm looking forward to tapping into the vast knowledge that obviously resides here in abundance, and I have a shed-load of naive questions lined up.(http://)

I hope not to test your patience too much.

Regards,

Richard

Title: Re: Hi from the Lake District
Post by: awemawson on July 31, 2015, 05:46:06 AM

Richard welcome  :thumbup:

The only naive question is the one you don't ask  :clap:

Title: Re: Hi from the English Lake District
Post by: John Rudd on July 31, 2015, 07:02:42 AM

Hi Richard,welcome to the forum..... :clap:

IIRC the G2 was a 250 single?....

Title: Re: Hi from the English Lake District
Post by: vtsteam on July 31, 2015, 08:33:54 AM

Hi Richard, welcome!! :beer:

Title: Re: Hi from the English Lake District
Post by: tom osselton on July 31, 2015, 03:32:14 PM

Welcome I have a 63 bsa b40 350 single and a 73 norton 750 high rider.

Title: Re: Hi from the English Lake District
Post by: krv3000 on August 01, 2015, 11:56:59 AM

hi and welcume

Title: Re: Hi from the English Lake District
Post by: Richard Lee on August 02, 2015, 09:58:58 AM

Many thanks for the kind welcome.

John:  Yep, the G2 is a 250cc single of 1960 vintage.  Spares are apparently not too abundant, so it seems I'm going to have to learn to use my lathe sooner rather than later.

So, if there are any expert tutors reading this and living somewhere close to Keswick; it would be great to hear from you.

Regards,

Richard(http://)