MadModder
Gallery, Projects and General => Gallery => Topic started by: Divided he ad on August 16, 2008, 11:03:48 AM
-
Just a little something I knocked up for shooting the videos of my machining.
The stand attatches to the lathe using an extended support (needed to get a reasonable field of view)
and to attatch to the mill just the stand with the hex base bolts directly to the bed 'T' slots.
First the finished article.
(http://i289.photobucket.com/albums/ll221/dividedhead/CAMERA%20STAND/DSC01403.jpg)
Then the camera mounted to the pod and positioned ready to film a ball being made ;D
(http://i289.photobucket.com/albums/ll221/dividedhead/CAMERA%20STAND/DSC01404.jpg)
There is a perspex (plexiglass) shield too just not photographed.
I have a few build pics of this but no plan. It all came from my head on the fly ;D
Ralph.
-
.... It all came from my head on the fly ;D
You have flies coming out of your head?? :bugeye: Dude, you need to get that looked at :clap:
Eric
-
:clap: Very Good.... You board and need something to do?? LOL ;D
You could make a torch :dremel: :hammer: :bugeye: :jaw:
Well it's an idea!!!!
Soon I'll get back onto my own projects, Then we will see on the fly!!!! (yep... It'll be a movie!!! :D )
Right I'm falling asleep as I type... Honest my head nearly hit the keyboard that time!!
Later.
Ralph.