MadModder
Gallery, Projects and General => Gallery => Topic started by: DaveH on November 11, 2012, 02:27:49 PM
-
This is a saw horse I made from steel tubing 1"x2" (50x25mm) for holding logs (small tree trunks :) ) so they can be cut with a chainsaw without inflicting any damage to ME! :)
The 6 legs cut to size and bolted together.
(http://www.nam-engineering.com/cm/albums/userpics/10008/normal_IMG_0958.jpg)
The wheelbarrow gives one a sense of size
(http://www.nam-engineering.com/cm/albums/userpics/10008/normal_IMG_0960.jpg)
More or less finished - still have to trim the holding chain, and the two small chains that stop the legs from doing the splits :lol: and some plastic end caps.
(http://www.nam-engineering.com/cm/albums/userpics/10008/normal_IMG_0962.jpg)
It can hold long timber
(http://www.nam-engineering.com/cm/albums/userpics/10008/normal_IMG_0965.jpg)
Very useful for holding awkward logs
(http://www.nam-engineering.com/cm/albums/userpics/10008/normal_IMG_0967.jpg)
And when finished it fold flat (well nearly)
(http://www.nam-engineering.com/cm/albums/userpics/10008/normal_IMG_0970.jpg)
That's it, now I just have to decide whether to paint it or not.
:beer:
DaveH
-
:thumbup: looks good and solid Dave :clap: :clap: :clap: :clap:
John DB built a thing with teeth to hold his logs :headbang:
Rob
-
Nice job Dave :thumbup: :thumbup: :thumbup: