MadModder
The Shop => Metal Stuff => Topic started by: doubleboost on October 01, 2014, 03:07:02 PM
-
Hi
Lads
Made a start on some wheels
The rim is part of a discarded Oxy bottle
(http://i261.photobucket.com/albums/ii63/john970s0/LISTER/10-01-2014_131254_zpsbcdf22d5.jpg) (http://s261.photobucket.com/user/john970s0/media/LISTER/10-01-2014_131254_zpsbcdf22d5.jpg.html)
(http://i261.photobucket.com/albums/ii63/john970s0/LISTER/10-01-2014_180327_zps8f6701dc.jpg) (http://s261.photobucket.com/user/john970s0/media/LISTER/10-01-2014_180327_zps8f6701dc.jpg.html)
(http://i261.photobucket.com/albums/ii63/john970s0/LISTER/10-01-2014_175514_zps6e9f8cb8.jpg) (http://s261.photobucket.com/user/john970s0/media/LISTER/10-01-2014_175514_zps6e9f8cb8.jpg.html)
(http://i261.photobucket.com/albums/ii63/john970s0/LISTER/10-01-2014_182435_zps7d214721.jpg) (http://s261.photobucket.com/user/john970s0/media/LISTER/10-01-2014_182435_zps7d214721.jpg.html)
This will be the inside
A bit of "decoration" will be given to the outside spokes
John
-
Oh yes!...... :thumbup:
I could do with some of those (4) for my Petter A1 I'm restoring..... :dremel:
Hmmm need to look for scrap oxy bot..... :D
-
Hi there, John,
Those slices of oxygen cylinder look very neat. Did you clean up the cut edges or do you have some super-precise cutting machine?
-
brill john i sed they wood look good
-
Now....... That's cute! :thumbup: :clap: :clap:
David D
-
Pete
Mick cut them for me on his big band saw
Cleaned up with a angle grinder
The cut finish was very good :drool: :drool: :drool: :drool:
John
-
Looking nice John , they should look a good match for the engine once done. That big bandsaw is just the job for such tasks :thumbup: glad I could help out.
Cheers Mick
-
Very nice!