MadModder

Gallery, Projects and General => Gallery => Topic started by: steamup on March 26, 2014, 05:40:37 PM

Title: Displacement lubricator
Post by: steamup on March 26, 2014, 05:40:37 PM

Having made four or five of these I have become frustrated by the process of filling these with the thick steam oil required. The steam ,oil pipe always seems to get in the way. I found this design on the net and thought I would give it a go.
Only time will tell if it makes much difference but it was fun to make.

Title: Re: Displacement lubricator
Post by: krv3000 on March 26, 2014, 06:23:32 PM

 :clap: it looks like it will do the job

Title: Re: Displacement lubricator
Post by: jb3cx on March 26, 2014, 08:06:07 PM

Good job ,how you getting on with the boiler.

Title: Re: Displacement lubricator
Post by: steamup on March 27, 2014, 03:19:40 PM

Hoping to start the boiler in a couple of weeks time once I do the bushes